Customize PCB Soldering Pallet,Durable Adjustable SMT Pallet

Customize PCB Soldering Pallet,Durable Adjustable SMT Pallet

Specification:
 

Gerber, Excellon and other data required 

Pin Land to SMT pad clearance evaluation

The two figures below each show part of a CSWSC in plan and section views. The right hand figure shows that more clearance
is required when the connector orientation is perpendicular to the wave.

PTH Components Located Parallel to direction through wave

The clearance required between the pin land and SMT pad can be made quite
small, as the solder does not have to flow "under" the component pockets.

PTH Components Located Perpendicular to direction through wave.

A larger separation is required due to the solder having to flow "under"
component pockets.

Working your way around the underside of the PCB, identify which components 
are parallel and perpendicular to the wave and assess the solderability of each 
PTH connector by comparing the actual separation against the graph right.

Ideally you want to be above the line in all cases.

PCB Design Implications - for Board Designers - or respin

We are often called upon by our customers to help with identifying design respin opportunities.

We will identify problem areas within a board and suggest appropriate movements of components. (Ideally before the PCB is fabricated)

However for board designers reading this, can you remember another four "rules" (to compete with the hundred other rules you have to have floating 
around in your head).

Keep large (height) SMT components away from PTH areas. 
Leave the leading and trailing areas around PTH components as clear as possible. 
DON'T put any SMT components within 3mm (0.12") of any PTH components. 
DON'T put all PTH components in line along one edge of a board - leave some space to allow us to support the masking in the centre of the board.

FAQ

(1) Discount price yes&no ?

 It is depending on the volume. The larger the volume is, the more discount you can 

enjoy.

(2) Why your price is a bit higher than other Chinese suppliers?

To meet the requirement of different customers and areas, our factory manufactures 

various kinds of quality for each item at a wide range of price. We can offer the 

products of different quality levels depending on customer’s target price and quality 

requirement.

(3) If I can get a sample ?

For existing samples (sizes not larger than 300*300mm) can be sent free of charge 

but you just need to bear shipping charge, or you can provide your DHL, FEDEX, 

EMS, UPS courier account number to us. 

For bigger sizes, or customized samples, it depends on negotiation.

(4) If you can guarantee the quality of mass production is same 

as the sample sent to me before?

Quality is our culture, is our life. We believe our products will give you a surprise. 

Our warehouse staff will leave another same sample in our workhouse, and marked 

your company name on it, which our production will be based on.

(5) How can you deal with quality issues after receiving the goods?

 1) First you take photos of unqualified goods and then our sales staff will send 

them to Manufacturing Department to verify. 

 2) If the problem is confirmed, our sales will explain the root cause and take 

corrective actions in coming orders.

3) Finally, we will negotiate with you to make some compensation.

Production flow

Welcome to customize PCB Reflow Soldering Pallets,PCB Fixtures:

Skype: s5@smtfly.com

Mobile/Wechat/WhatsApp: +86-136-8490-4990

Contact: Bunny